Submit a request
Learn the Issues
Science & Technology
Laws & Regulations
Wastes - Frequent Questions
RCRA Test Methods (SW-846)
New articles and comments
Should a used oil marketer use SW-846 Method 1311 (TCLP) to determine whether used oil meets the specification levels for arsenic, cadmium, chromium and lead?
What EPA SW-846 test methods are available for use in detecting the presence of mercury?
Can digests from SW-846 Methods 3015A and 3051A be used directly on an automated mercury analyzer without any further sample treatment?
What is the holding time for soil samples analyzed for hexavalent chromium by SW-846 Method 7196A?
Is SW-846 Method 3050B appropriate for the digestion of coal ash?
What is the basis for the reduction from 10% to 1% weight loss value for discarding samples from SW-846 Methods 3015 and 3051 to Methods 3015A and 3051A?
SW-846 Test Methods 9012B and 9010C and compliance with 40 CFR 268.40 footnote 7.
Does ORCR observe the same holding time and preservations for SW-846 Method 7199 for hexavalent chromium allowed under 40 CFR 136?
Extraction fluids for SW-846 Method 1312 (SPLP) analyses of samples that may contain cyanide.
How do you interpret the mass calibration criteria for Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) as described in SW-846 Method 6020A?
Can SW-846 Method 3005A be used for mercury analysis by Method 6020A, Inductively Coupled Plasma-Mass Spectrometry (ICP-MS)?
Is SW-846 Method 7199 intended for the determination of dissolved or total hexavalent chromium?
What are the filtration and headspace requirements for SW-846 Method 6850?
For SW-846 Method 6020A, is the serial dilution to be performed on the sample or is the post-digestion spiked sample to be serially diluted?
What is the recommended frequency for the frequency of analysis of the Interference Check Samples (ICS) for SW-846 Method 6010C?
Decay equation for Radium-228 in SW-846 Method 9320.